na - 1690 bls7g2729l - 350p at 2700 - 2900 mhz rev. 2 28 april 2015 application measurement report document information info content keywords na - 1690 abstract measurement results of a demo board for 2700 - 2900 mhz with 1x bls7g2729l - 350p .
nxp semiconductors na - 1690 bls7g2729l - 350p at 2700 - 2900 mhz na - 1690 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2015 . all rights reserved. application measurement report rev. 2 28 april 2015 2 of 8 contact information for more information, please visit: http://www.nxp.com for sales office addresses, please send an email to: salesaddresses@nxp.com revision history rev date description 1 20130114 2 20150424 update for web publication
error! unkno w n docume nt property name. error! unknown document property name. error! unknown document property name. nxp semiconductors na - 1690 bls7g2729l - 350p at 2700 - 2900 mhz na - 1690 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2015 . all rights reserved. application measurement report rev. 2 28 april 2015 3 of 8 1. introduction 1.1 general description this document contains measurement results of a 2700 - 2900 mhz demo amplifier (board na - 1690 ) with 1x bls7g2729l - 350p . 1.1.1 test object details tran sistor type: bls7g2729l - 350p (bold down) production code: package: sot539 board: bls7g2729l - 350p r2 - output bls7g2729l - 350p r2 - intput demo number: na - 1690 1.2 used test signals pulsed cw: pulsed cw, pulse width 300us, duty cycle 10% 1.3 testcircuit a description of this circuit can be found in chapter 3 . the test circuit has been designed on rogers 3006, h=0.635mm, er=6.15, 2x35um. supply voltage (drain - source) is typical 32v. increase vgs untill the total idq will be 200ma. note: use an electrolytic capacitor of 10000uf parallel to the vds as close as possible to the demo board. this delivers the current peaks to the demo board.
error! unkno w n docume nt property name. error! unknown document property name. error! unknown document property name. nxp semiconductors na - 1690 bls7g2729l - 350p at 2700 - 2900 mhz na - 1690 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2015 . all rights reserved. application measurement report rev. 2 28 april 2015 4 of 8 2. measurement results 2.1 pulsed cw C power sweep 2.1.1 g ain & efficiency @ frequency=2700 - 2900mhz 2.2 nwa - sweep 2.2.1 gain and irl @ pout=46.5dbm 20.0 30.0 40.0 50.0 60.0 70.0 80.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 0 50 100 150 200 250 300 350 400 450 500 efficiency [%] gain [db] pout [w] gain/eff vs pout[w] pcw 0.30ms 10%, vds=32.1v, idq1=200ma gain 2700mhz gain 2750mhz gain 2800mhz gain 2850mhz gain 2900mhz ef f 2700mhz ef f 2750mhz ef f 2800mhz ef f 2850mhz ef f 2900mhz - 9.6db - 12.0db - 13.2db - 15.4db - 22.4db 12.4db 12.8db 13.0db 12.9db 12.9db 0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 - 30.0 - 25.0 - 20.0 - 15.0 - 10.0 - 5.0 0.0 5.0 10.0 2600 2650 2700 2750 2800 2850 2900 2950 3000 s21 [db] s11 [db] frequency [mhz] s11/s21 vs frequency vna, vds=31.7v, idq1=200ma, pout=46.5dbm s11 s21
error! unkno w n docume nt property name. error! unknown document property name. error! unknown document property name. nxp semiconductors na - 1690 bls7g2729l - 350p at 2700 - 2900 mhz na - 1690 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2015 . all rights reserved. application measurement report rev. 2 28 april 2015 5 of 8 3. pcb layout 3.1 pcb layout drawing 3.2 component list ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ??? ??? ??? ?? ??? ??? ??? ??? ??? ??? ??? ??? ?????? ?????? ???? partslist bls7g2729l-350p 2x 40x60mm application circuit input / output no. value type comment c1,c2 4,7uf tantalum tekelec c3,c4,c11,c12 1nf atc700a soldered on the side c5,c6 12pf atc800a soldered on the side c7 20pf atc800a soldered on the side c8 30pf atc800b soldered on the side c9,c10 12pf atc800a soldered on the side c13,c14 1nf atc700a soldered on the side c15.c16 220uf / 63v electrolytic capacitor r1,r2 9.1 smd 0805 r3,r4 8.2 smd 0805 r7* 5.1 smd 1206 * soldered on the leads of the device r5//l1 r6//l2 pcb rogers 3006 h=0.64mm, cu=35um er=6.15 input 40mmx60mm output 40mmx60mm 5.7//ferrite sm bead, 2773021447, fair-rite 5.7//ferrite sm bead, 2773021447, fair-rite
error! unkno w n docume nt property name. error! unknown document property name. error! unknown document property name. nxp semiconductors na - 1690 bls7g2729l - 350p at 2700 - 2900 mhz na - 1690 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2015 . all rights reserved. application measurement report rev. 2 28 april 2015 6 of 8 3.3 photos demo board 4. attachments please see the attachment for the support files.
error! unkno w n docume nt property name. error! unknown document property name. error! unknown document property name. nxp semiconductors na - 1690 bls7g2729l - 350p at 2700 - 2900 mhz na - 1690 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2015 . all rights reserved. application measurement report rev. 2 28 april 2015 7 of 8 5. legal information 5.1 definitions draft the document is a draft version only. the content is still under internal review and subject to formal approval, which may result in modifications or additions. nxp semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. 5.2 disclaimers limited warranty and liability information in this document is believed to be accurate and reliable. however, nxp semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. in no event shall nxp semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the remo val or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. notwithstanding any damages that customer might incur for any reason whatsoe ver, nxp semiconductors aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the terms and conditions of commercial sale of nxp semiconductors. right to make changes nxp semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. this document supersedes and replaces all information supplied prior to the publication hereof. suitability for use nxp semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life - critical or safety - critical systems or equipment, nor in applications where failure or malfunct ion of an nxp semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. nxp semiconductors accepts no liability for inclusion and/or use of nxp semiconductors products in such equipmen t or applications and therefore such inclusion and/or use is at the customers own risk. applications applications that are described herein for any of these products are for illustrative purposes only. nxp semiconductors makes no representation or warr anty that such applications will be suitable for the specified use without further testing or modification. customers are responsible for the design and operation of their applications and products using nxp semiconductors products, and nxp semiconductors accepts no liability for any assistance with applications or customer product design. it is customers sole responsibility to determine whether the nxp semiconductors product is suitable and fit for the customers applications and products planned, as wel l as for the planned application and use of customers third party customer(s). customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. nxp semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customers applications or products, or the application or use by customers third party customer(s). customer is responsible for doing all nece ssary testing for the customers applications and products using nxp semiconductors products in order to avoid a default of the applications and the products or of the application or use by customers third party customer(s). nxp does not accept any liabil ity in this respect. export control this document as well as the item(s) described herein may be subject to export control regulations. export might require a prior authorization from competent authorities. 5.3 trademarks notice: all referenced brands, produ ct names, service names and trademarks are property of their respective owners.
nxp semiconductors na - 1690 bls7g2729l - 350p at 2700 - 2900 mhz please be aware that important notices concerning this document and the product(s) described herein, have been included in the section 'legal information'. ? nxp b.v. 201 5 . all rights reserved. for more information, please visit: http://www.nxp.com for sales office addresses, please send an email to: salesaddresses@nxp.com date of release: 28 april 2015 document identifier: na - 1690 6. contents 1. introduction ................................ ................................ ..... 3 1.1 general description ................................ ....................... 3 1.1.1 test object details ................................ .......................... 3 1.2 used test signals ................................ ........................... 3 1.3 testcircuit ................................ ................................ ....... 3 2. measurement results ................................ ..................... 4 2.1 pulsed cw C power sweep ................................ ........... 4 2. 1.1 gain & efficiency @ frequency=2700 - 2900mhz ........... 4 2.2 nwa - sweep ................................ ................................ ... 4 2.2.1 gain and irl @ pout=46.5dbm ................................ ..... 4 3. pcb layout ................................ ................................ ...... 5 3.1 pcb layout d rawing ................................ ...................... 5 3.2 component list ................................ ............................... 5 3.3 photos demo board ................................ ...................... 6 4. att achments ................................ ................................ ..... 6 5. legal information ................................ ............................ 7 5.1 definitions ................................ ................................ ...... 7 5.2 disclaimers ................................ ................................ ..... 7 5.3 trademarks ................................ ................................ .... 7 6. contents ................................ ................................ ........... 8
|
